Auto Nameplates - Custom Car Emblems

Features 

• Car Emblem's Custom shape maintains your brand and logo integrity.
• Manufactured for maximum durability to withstand road salt, car washes, and extreme sunlight.
• Attachments: Double coated exterior grade foam adhesive strip applied to back or as many countersunk holes (by special request) as needed. To assure a proper bond, the adhesive tape must be applied to clean, dry, wax-free surface at an ambient temperature between 65 F & 99 F.  It is important the adhesive has sufficient amount of pressure applied, evenly from corner to corner, to insure the foam carrier fills all voids in the substrate. After the tape is properly applied allow up to 72 hours for the adhesive to become fully bonded to the substrate.
• One adhesive strip* up to 3/4" wide, or as many countersunk holes as needed.  *Contact us for nameplates that require more than one adhesive strip or wider width.
• License Plate Screws are not provided with nameplates.
• 100% Made in the USA
• Used by Schools, Teams, Clubs, Auto Dealers
• Makes for an amazing fundraiser or a giveaway
  for any new students, parents, or alumni
• Manufactured with raised graphics for an eye-popping effect
• Max size: Up to 2" x 7" not over 14 square inches